Requerimientos de diseño
1. Material:
MATERIAL: wood chips + sludge
Capacidad: 1.5t / h
Moisture before drying: 75%
Humedad después del secado: 15%
Water dried: 1059kg/h
2. Design conditions
Heat resource: steam
Temperature of steam: 200ºC
Exhaust gas temperature:70~80ºC
Secado por humedad: 1235Kg/h
Área de instalación: interior
Alimentación: 380V, 50Hz, trifásica 3 hilos.
Capacidad instalada: 106kw
3. Dryer type: HZG-Φ2.4x24 rotating dryer
4. Installed Power: 140kW
Procesamiento
1. The drum drying system consists of heat resource, feeding system, drum, discharger, cyclone, I.D. fan and control system.
2. The wet sludge and wood chips are fed with screw conveyors into the mixing device, where the materials are mixed. Then the mixture passed the air lock and entering the drum.
3. El tambor se coloca de forma inclinada, de modo que el material pueda llegar al extremo de descarga por gravedad.
4. The wet material is distributed by the distributing (shoveling) plates inside drum and moving forward with the hot gas.
5. El material seco se descarga del descargador.
6. Los gases de combustión residuales pasan a través del ciclón y el polvo se recoge y descarga.